Request Information
  • 0.0030 Inch (in) Thickness Stainless Steel Sheets

    0.0030 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0040 Inch (in) Thickness Stainless Steel Sheets

    0.0040 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0050 Inch (in) Thickness Stainless Steel Sheets

    0.0050 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0060 Inch (in) Thickness Stainless Steel Sheets

    0.0060 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0080 Inch (in) Thickness Stainless Steel Sheets

    0.0080 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (6)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0100 Inch (in) Thickness Stainless Steel Sheets

    0.0100 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (6)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0120 Inch (in) Thickness Stainless Steel Sheets

    0.0120 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (6)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0155 Inch (in) Thickness Stainless Steel Sheets

    0.0155 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (6)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0180 Inch (in) Thickness Stainless Steel Sheets

    0.0180 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0200 Inch (in) Thickness Stainless Steel Sheets

    0.0200 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0250 Inch (in) Thickness Stainless Steel Sheets

    0.0250 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (6)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

  • 0.0310 Inch (in) Thickness Stainless Steel Sheets

    0.0310 Inch (in) Thickness 17-7PH Alloy Condition 'C' Temper Stainless Steel Sheets

    (5)

    AMS-5529, ASTM-A-693

    Physical Properties

    • Minimum Tensile Strength - 200 ksi
    • Minimum Yield Strength (0.2% Offset) - 175 ksi
    • Elongation in 2 Inches - 1%
    • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)