Request Information
  • 0.0050 Inch (in) Thickness Stainless Steel Sheets

    0.0050 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0080 Inch (in) Thickness Stainless Steel Sheets

    0.0080 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0100 Inch (in) Thickness Stainless Steel Sheets

    0.0100 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0120 Inch (in) Thickness Stainless Steel Sheets

    0.0120 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0155 Inch (in) Thickness Stainless Steel Sheets

    0.0155 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0200 Inch (in) Thickness Stainless Steel Sheets

    0.0200 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0250 Inch (in) Thickness Stainless Steel Sheets

    0.0250 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0310 Inch (in) Thickness Stainless Steel Sheets

    0.0310 Inch (in) Thickness T301 Alloy Quarter Hard Temper Stainless Steel Sheets

    (5)

    AMS-5517, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 125 ksi
    • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
    • Elongation in 2 Inches - 25%
    • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)