-
T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
t302-304-alloy-annealed-tmpr-stainless-steel-sheet
-
0.0020 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0030 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0040 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0050 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0060 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0070 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0080 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0100 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0120 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0155 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0180 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0200 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0250 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)
-
0.0310 Inch (in) Thickness T302 / 304 Alloy Annealed Temper Stainless Steel Sheets
AMS-5516 / 5513, ASTM-A-666 / A-240
Physical Properties- Minimum Tensile Strength - 75 ksi
- Minimum Yield Strength (0.2% Offset) - 30.0 ksi
- Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
- Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
- Elongation in 2 Inches (Over 0.004" Thick) - 40%
- Maximum Hardness - 92 HRB (Hardness for ref. only)