Request Information
  • 0.0030 Inch (in) Thickness Stainless Steel Sheets

    0.0030 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0040 Inch (in) Thickness Stainless Steel Sheets

    0.0040 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0050 Inch (in) Thickness Stainless Steel Sheets

    0.0050 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0060 Inch (in) Thickness Stainless Steel Sheets

    0.0060 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0070 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    0.0070 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0080 Inch (in) Thickness Stainless Steel Sheets

    0.0080 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0100 Inch (in) Thickness Stainless Steel Sheets

    0.0100 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0120 Inch (in) Thickness Stainless Steel Sheets

    0.0120 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0155 Inch (in) Thickness Stainless Steel Sheets

    0.0155 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (6)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0180 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    0.0180 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0200 Inch (in) Thickness Stainless Steel Sheets

    0.0200 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0250 Inch (in) Thickness Stainless Steel Sheets

    0.0250 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

  • 0.0310 Inch (in) Thickness Stainless Steel Sheets

    0.0310 Inch (in) Thickness T302 / 304 Half Hard Temper Stainless Steel Sheets

    (5)

    AMS-5904 / 5911, ASTM-A-666

    Physical Properties

    • Minimum Tensile Strength - 150 ksi
    • Minimum Yield Strength (0.2% Offset) - 110 ksi
    • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 9%
    • Elongation in 2 Inches (Over 0.0150" Thick) - 10%
    • Maximum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)