Request Information
AMS-5519, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 185 ksi
  • Minimum Yield Strength (0.2% Offset) - 140 ksi
  • Elongation in 2 Inches (Up to 0.0150" Thick) - 8%
  • Elongation in 2 Inches (Over 0.0150" Thick) - 9%
  • Minimum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
Unit of Measure

Specifications

Width

 N/A 12 in

Length

 N/A 12 in

Alloy

 N/A T301 Stainless Steel Alloy

Thickness

 N/A 0.0030 in

Thickness Tolerance

 N/A 10 %

American Society for Testing and Materials (ASTM) Steel Standard

 N/A ASTM-A-666

Aerospace Material Specification (AMS)

 N/A AMS-5519

Alloy Steel Type

 N/A Stainless Steel

Material Form

 N/A Sheet

Temper

 N/A Full Hard Temper

Chemical Composition

Maximum Carbon Composition

 N/A 0.15 %

Maximum Manganese Composition

 N/A 2.00 %

Maximum Silicon Composition

 N/A 1.00 %

Maximum Phosphorus Composition

 N/A 0.04 %

Maximum Sulfur Composition

 N/A 0.03 %

Maximum Chromium Composition

 N/A 18.00 %

Maximum Nickel Composition

 N/A 8.00 %

Maximum Molybdenum Composition

 N/A 0.75 %

Maximum Copper Composition

 N/A 0.75 %

Chemical Composition Table

 N/A

Physical Properties

Minimum Tensile Strength

 N/A 185 ksi

Minimum Yield Strength (0.2 Percent (%) Offset)

 N/A 140 ksi

Minimum Elongation in 2 Inch (in) (Up to 0.0150 Inch (in) Thick)

 N/A 8 %

Minimum Elongation in 2 Inch (in) (Over 0.0150 Inch (in) Thick)

 N/A 9 %
Minimum Hardness1 N/A 41 Rockwell C
  • 1 Product shall not be rejected on the basis of hardness if tensile properties are acceptable