Thin Metal Sheets
Thin Metal Sheets
15047 Sierra Bonita Lane
Chino, CA 91710
T: (909) 393 2273
F: (909) 393 2811
Email: support@thinmetalsheets.com
Print Back
AMS-5519, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 185 ksi
  • Minimum Yield Strength (0.2% Offset) - 140 ksi
  • Elongation in 2 Inches (Up to 0.0150" Thick) - 8%
  • Elongation in 2 Inches (Over 0.0150" Thick) - 9%
  • Minimum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
Unit of Measure
Items 0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
T301 Full Hard 0.0181" x 12" x 12"
T301 Full Hard 0.0181" x 12" x 12"
List Price $75.00
 0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
T301 Full Hard 0.0181" x 12" x 18"
T301 Full Hard 0.0181" x 12" x 18"
List Price $85.00
 0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
T301 Full Hard 0.0181" x 12" x 24"
T301 Full Hard 0.0181" x 12" x 24"
List Price $95.00
 0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
T301 Full Hard 0.0181" x 24" x 24"
T301 Full Hard 0.0181" x 24" x 24"
List Price $115.00
 0.0181 Inch (in) Thickness T301 Alloy Full Hard Temper Stainless Steel Sheets
T301 Full Hard 0.0181" x 24" x 36"
T301 Full Hard 0.0181" x 24" x 36"
List Price $135.00
Description N/A AMS-5519, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 185 ksi
  • Minimum Yield Strength (0.2% Offset) - 140 ksi
  • Elongation in 2 Inches (Up to 0.0150" Thick) - 8%
  • Elongation in 2 Inches (Over 0.0150" Thick) - 9%
  • Minimum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
Width N/A 12 in N/A 12 in N/A 12 in N/A 24 in N/A 24 in
Length N/A 12 in N/A 18 in N/A 24 in N/A 24 in N/A 36 in
Alloy N/A T301 Stainless Steel Alloy
Thickness N/A 0.0181 in
Thickness Tolerance N/A 0.001 in
American Society for Testing and Materials (ASTM) Steel Standard N/A ASTM-A-666
Aerospace Material Specification (AMS) N/A AMS-5519
Alloy Steel Type N/A Stainless Steel
Material Form N/A Sheet
Temper N/A Full Hard Temper
Maximum Carbon Composition N/A 0.15 %
Maximum Manganese Composition N/A 2.00 %
Maximum Silicon Composition N/A 1.00 %
Maximum Phosphorus Composition N/A 0.04 %
Maximum Sulfur Composition N/A 0.03 %
Maximum Chromium Composition N/A 18.00 %
Maximum Nickel Composition N/A 8.00 %
Maximum Molybdenum Composition N/A 0.75 %
Maximum Copper Composition N/A 0.75 %
Chemical Composition Table N/A

Minimum Tensile Strength N/A 185 ksi
Minimum Yield Strength (0.2 Percent (%) Offset) N/A 140 ksi
Minimum Elongation in 2 Inch (in) (Up to 0.0150 Inch (in) Thick) N/A 8 %
Minimum Elongation in 2 Inch (in) (Over 0.0150 Inch (in) Thick) N/A 9 %
Minimum Hardness1 N/A 41 Rockwell C
  • 1 Product shall not be rejected on the basis of hardness if tensile properties are acceptable