T301 Half Hard 0.0180" x 12" x 12" On Thin Metal Sheets

Thin Metal Sheets
15047 Sierra Bonita Lane
Chino, CA 91710
T: (909) 393 2273
F: (909) 393 2811
Email: support@thinmetalsheets.com

Print Back

AMS-5518, ASTM-A-666

Physical Properties

Minimum Tensile Strength - 150 ksi
Minimum Yield Strength (0.2% Offset) - 110 ksi
Elongation in 2 Inches (Up to 0.0150" Thick) - 15%
Elongation in 2 Inches (Over 0.0150" Thick) - 18%
Minimum Hardness - 32 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)

Unit of Measure

Specifications | Chemical Composition | Physical Properties

Specifications

Width	N/A 12 in
Length	N/A 12 in
Alloy	N/A T301 Stainless Steel Alloy
Thickness	N/A 0.0180 in
Thickness Tolerance	N/A 0.001 in
American Society for Testing and Materials (ASTM) Steel Standard	N/A ASTM-A-666
Aerospace Material Specification (AMS)	N/A AMS-5518
Alloy Steel Type	N/A Stainless Steel
Material Form	N/A Sheet
Temper	N/A Half Hard Temper

Chemical Composition

Maximum Carbon Composition	N/A 0.15 %
Maximum Manganese Composition	N/A 2.00 %
Maximum Silicon Composition	N/A 1.00 %
Maximum Phosphorus Composition	N/A 0.04 %
Maximum Sulfur Composition	N/A 0.03 %
Maximum Chromium Composition	N/A 18.00 %
Maximum Nickel Composition	N/A 8.00 %
Maximum Molybdenum Composition	N/A 0.75 %
Maximum Copper Composition	N/A 0.75 %
Chemical Composition Table	N/A

Physical Properties

Minimum Tensile Strength	N/A 150 ksi
Minimum Yield Strength (0.2 Percent (%) Offset)	N/A 110 ksi
Minimum Elongation in 2 Inch (in) (Up to 0.0150 Inch (in) Thick)	N/A 15 %
Minimum Elongation in 2 Inch (in) (Over 0.0150 Inch (in) Thick)	N/A 18 %
Minimum Hardness¹	N/A 32 Rockwell C

¹ Product shall not be rejected on the basis of hardness if tensile properties are acceptable