AMS-5517, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 125 ksi
  • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
  • Elongation in 2 Inches - 25%
  • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
Request Information
Unit of Measure
Items
0.0120 Inch (in) Thickness Stainless Steel Sheets

T301 Quarter Hard 0.0120" x 12" x 12"
List Price $85.00
0.0120 Inch (in) Thickness Stainless Steel Sheets

T301 Quarter Hard 0.0120" x 12" x 18"
List Price $95.00
0.0120 Inch (in) Thickness Stainless Steel Sheets

T301 Quarter Hard 0.0120" x 12" x 24"
List Price $105.00
0.0120 Inch (in) Thickness Stainless Steel Sheets

T301 Quarter Hard 0.0120" x 24" x 24"
List Price $125.00
0.0120 Inch (in) Thickness Stainless Steel Sheets

T301 Quarter Hard 0.0120" x 24" x 36"
List Price $145.00
Description N/A AMS-5517, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 125 ksi
  • Minimum Yield Strength (0.2% Offset) - 75.0 ksi
  • Elongation in 2 Inches - 25%
  • Minimum Hardness - 25 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
Width N/A 12 in N/A 12 in N/A 12 in N/A 24 in N/A 24 in
Length N/A 12 in N/A 18 in N/A 24 in N/A 24 in N/A 36 in
Alloy N/A T301 Stainless Steel Alloy
Thickness N/A 0.0120 in
Thickness Tolerance N/A 5 %
American Society for Testing and Materials (ASTM) Steel Standard N/A ASTM-A-666
Aerospace Material Specification (AMS) N/A AMS-5517
Alloy Steel Type N/A Stainless Steel
Material Form N/A Sheet
Temper N/A Quarter Hard Temper
Maximum Carbon Composition N/A 0.15 %
Maximum Manganese Composition N/A 2.00 %
Maximum Silicon Composition N/A 1.00 %
Maximum Phosphorus Composition N/A 0.04 %
Maximum Sulfur Composition N/A 0.03 %
Maximum Chromium Composition N/A 18.00 %
Maximum Nickel Composition N/A 8.00 %
Maximum Molybdenum Composition N/A 0.75 %
Maximum Copper Composition N/A 0.75 %
Chemical Composition Table N/A

Minimum Tensile Strength N/A 125 ksi
Minimum Yield Strength (0.2 Percent (%) Offset) N/A 75.0 ksi
Minimum Elongation in 2 Inch (in) N/A 25 %
Minimum Hardness1 N/A 25 Rockwell C
  • 1 Product shall not be rejected on the basis of hardness if tensile properties are acceptable