17-7PH Condition 'C' 0.0310" x 12" x 24" On Thin Metal Sheets

Thin Metal Sheets
15047 Sierra Bonita Lane
Chino, CA 91710
T: (909) 393 2273
F: (909) 393 2811
Email: support@thinmetalsheets.com

Print Back

AMS-5529, ASTM-A-693

Physical Properties

Minimum Tensile Strength - 200 ksi
Minimum Yield Strength (0.2% Offset) - 175 ksi
Elongation in 2 Inches - 1%
Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)

Unit of Measure

Specifications | Chemical Composition | Physical Properties

Specifications

Width	N/A 12 in
Length	N/A 24 in
Alloy	N/A 17-7PH Stainless Steel Alloy
Thickness	N/A 0.0310 in
Thickness Tolerance	N/A 0.001 in
American Society for Testing and Materials (ASTM) Steel Standard	N/A ASTM-A-693
Aerospace Material Specification (AMS)	N/A AMS-5529
Alloy Steel Type	N/A Stainless Steel
Material Form	N/A Sheet
Temper	N/A Condition 'C' Temper

Chemical Composition

Maximum Carbon Composition	N/A 0.09 %
Maximum Manganese Composition	N/A 1.00 %
Maximum Silicon Composition	N/A 1.00 %
Maximum Phosphorus Composition	N/A 0.04 %
Maximum Sulfur Composition	N/A 0.03 %
Maximum Chromium Composition	N/A 18.00 %
Maximum Nickel Composition	N/A 7.75 %
Maximum Aluminum Composition	N/A 1.50 %
Chemical Composition Table	N/A

Physical Properties

Minimum Tensile Strength	N/A 200 ksi
Minimum Yield Strength (0.2 Percent (%) Offset)	N/A 175 ksi
Minimum Elongation in 2 Inch (in)	N/A 1 %
Minimum Hardness¹	N/A 41 Rockwell C

¹ Product shall not be rejected on the basis of hardness if tensile properties are acceptable